The mounted plough EuroStar combines the advantages of a standard plough with those of a variable.

With a 3-5 hole working width adjustment the EuroStar can be adapted fast and simple to the different structures of soil.

In combination with the well-tried CX-central adjustment the name EuroStar stands for high flexibility and effectiveness in soil cultivation.

Advantages of the
EuroStar plough technology

The perfect solution  –
the CX adjustment center

Advantages of the EuroStar
bearing technology

  • Plough frame made of alloy steel, sectional tubes with 10 mm thickness of the square tubing on all models.
  • EuroStar 120 without drill holes in the frame
  • CX adjustment center with simple plough adjustment for easy pulling ploughing
  • Guidance of the plough legs on both sides cares for high stability
  • Working widths from 34- 55 cm simple adjustable

Simple adjusting for easy pulling ploughing

  • Variable first furrow width adjustment of the first body with
    the C – spindle.
  • Easy adaptation to different tractor tracks.
  • No change of the traction point because of parallel shift.
  • The traction point adjustment with the X – spindle cares for a free of side pull ploughing
  • With the traction point indicator an optimal and easy adjustment is secured. “1” (independent from the first furrow width adjustment)
  • Separate inclining angle can be adjusted independently on both sides of the plough.
  • Hydraulic frame turning draw in ram „2“
  • The bearing technology has been taken over from the Titan Vario models and so also give to the EuroStar models a essentially longer durability.
  • Only one frame boring EuroStar 120/300 no single frame boring
  • Working width adjustment is lying outside of the frame
  • Long spacing of bodies and great working widths possible also at the lighter EuroStar models
  • In the area of the frame boring strengthening plates care for a higher stability.
  • Each additional drill hole in the main frame is a loss in stability
  1. Additional strengthening of the frame in the area of borings
  2. Thick spare tubing of the frame profile all models 10 mm (alloy steel)
  3. The bearing pin and the bush (through the frame) care for highest stability.
  4. Arresting pin for hole adjustment of the working width outside of the frame.



Regent plough factory Ltd.